Call: 00971507737755          | ENGLISH   |    عربي

English
Search

Lorenz Deepmax Z1 - Lorenz

Manufacturer: Lorenz
Lorenz Deepmax Z1 is a pulse GBS Metal detector with two fully automatic metal separations and individually switchable bottom filters.
User Manual / دليل المستخدم

LORENZ DETECTING SYSTEMS had from the outset only one goal: To build the best Metal detectors for the different needs of seekers around the world. LORENZ locating systems are used worldwide with great success. After years of close collaboration with professional users and hobby seekers, LORENZ is today one of the most innovative manufacturers of pulse induction Metal detectors.

New and proven technologies such as static conductance detection in PI technology, high-power transmitters with MOSFET technology and special filters for the suppression of disturbing influences could be developed and further improved. The new LORENZ DEEP MAX Z1 is one of the most sensitive and advanced PI Metal detectors on the world market. The result of many years of research and development work was realized in this device.

This device is a pulse GBS Metal detector with two fully automatic metal separations and individually switchable bottom filters. Microprocessor-controlled electronics and static evaluation with high stability and sensitivity have been implemented in the DEEP MAX Z1 with newly developed circuit techniques for the suppression of alternating field interference and a sophisticated pulse power electronics.

With this Metal detector, the user is able to reliably locate particularly low-lying metal objects, even in saltwater or heavily mineralized, magnetic soils. In addition, when using small search coils also coins and smaller objects can be located.

An outstanding sensitivity for precious metals, such. As gold, silver, copper and many alloys, coupled with two newly developed metal distinctions z. B. parallel to the acoustic indication, in addition, the temporal decay behavior of the eddy currents in located metal objects with a numerical value between 0 and 99 display, or with a FERROUS / NON-FERROUS display, differentiate iron from non-ferrous metals, make this detector for a variety of applications interesting.

The simplicity of operation and the clear arrangement of the splash-proof controls, the very well-read, special, with lighting developed LC display, are particularly helpful.

The operating instructions are supplied in German, English and Turkish. Plus DVD movie in German and English language.

Technical data and properties:

  • Pulse frequency with small search coil: approx. 2100 / 1400 pulses - second
  • Operating temperature range (charger): 0 ° to + 40 ° C
  • Power supply: 12 V / 7,2 Ah, NiMH battery
  • With a GPS module (Global Positioning System)
  • Integrated data logger
  • Charger: Fast charger with wide range input (100 - 240 V)
  • Charging time: Max. 8 hours with a fully discharged battery
  • Audio frequency (VCO): 0 - 3800 kHz
  • Operating temperature: - 5 ° C to + 55 ° C
  • Operating time: Up to approx. 14 hours

The possible numerical values ​​of the different types of metal on the display correspond to z. From 00 to 99:
00 - 10: coin, ring, pull tab, aluminum foil or gold coin
10 - 20: bronze, silver or nickel coins
20 - 30: For example, Coke can, or small iron part
30 - 50: iron parts, nails
50 - 60: Larger pieces of iron
60 - 80: Medium-sized bronze, copper or silver objects
80 - 99: Large bronze, copper, silver or gold objects

This special type of metal discrimination works exclusively with the specially developed search coils DD Ø 26 cm and DD Ø 35 cm.

The detection depths of the Z1 are much higher than those of commercially available pulse-induction or VLF-TR Metal detectors.
With the XELUMX x 1 depth finder coil and the double depth finder, search depths of approximately 1 meter can be achieved under optimal conditions for very large metal objects.

With the universal 12-meter cable search coil Ø 3 x 3 meter (frame in own construction), with a metal object Ø 3 x 3 Meter, a search depth of approx. 8 meters can be achieved even in mineral soils.

 

Supplied in carrying case with:

  • electronics part
  • Headphone
  • Padded carrying strap
  • Deep locate search coil Ø 1 x 1 meters
  • Search Coil Double D Ø 35 cm
  • Telescopic rod with forearm support
  • Charger with the adapter for all countries
  • Accumulator
  • USB - PC connection cable for firmware updates and possible later data transfer
  • Manual German - English also as a movie on DVD
 
Write your own review Close Review Form
*
*
Bad
Excellent
*
*
*
Description

LORENZ DETECTING SYSTEMS had from the outset only one goal: To build the best Metal detectors for the different needs of seekers around the world. LORENZ locating systems are used worldwide with great success. After years of close collaboration with professional users and hobby seekers, LORENZ is today one of the most innovative manufacturers of pulse induction Metal detectors.

New and proven technologies such as static conductance detection in PI technology, high-power transmitters with MOSFET technology and special filters for the suppression of disturbing influences could be developed and further improved. The new LORENZ DEEP MAX Z1 is one of the most sensitive and advanced PI Metal detectors on the world market. The result of many years of research and development work was realized in this device.

This device is a pulse GBS Metal detector with two fully automatic metal separations and individually switchable bottom filters. Microprocessor-controlled electronics and static evaluation with high stability and sensitivity have been implemented in the DEEP MAX Z1 with newly developed circuit techniques for the suppression of alternating field interference and a sophisticated pulse power electronics.

With this Metal detector, the user is able to reliably locate particularly low-lying metal objects, even in saltwater or heavily mineralized, magnetic soils. In addition, when using small search coils also coins and smaller objects can be located.

An outstanding sensitivity for precious metals, such. As gold, silver, copper and many alloys, coupled with two newly developed metal distinctions z. B. parallel to the acoustic indication, in addition, the temporal decay behavior of the eddy currents in located metal objects with a numerical value between 0 and 99 display, or with a FERROUS / NON-FERROUS display, differentiate iron from non-ferrous metals, make this detector for a variety of applications interesting.

The simplicity of operation and the clear arrangement of the splash-proof controls, the very well-read, special, with lighting developed LC display, are particularly helpful.

The operating instructions are supplied in German, English and Turkish. Plus DVD movie in German and English language.

Technical data and properties:

  • Pulse frequency with small search coil: approx. 2100 / 1400 pulses - second
  • Operating temperature range (charger): 0 ° to + 40 ° C
  • Power supply: 12 V / 7,2 Ah, NiMH battery
  • With a GPS module (Global Positioning System)
  • Integrated data logger
  • Charger: Fast charger with wide range input (100 - 240 V)
  • Charging time: Max. 8 hours with a fully discharged battery
  • Audio frequency (VCO): 0 - 3800 kHz
  • Operating temperature: - 5 ° C to + 55 ° C
  • Operating time: Up to approx. 14 hours

The possible numerical values ​​of the different types of metal on the display correspond to z. From 00 to 99:
00 - 10: coin, ring, pull tab, aluminum foil or gold coin
10 - 20: bronze, silver or nickel coins
20 - 30: For example, Coke can, or small iron part
30 - 50: iron parts, nails
50 - 60: Larger pieces of iron
60 - 80: Medium-sized bronze, copper or silver objects
80 - 99: Large bronze, copper, silver or gold objects

This special type of metal discrimination works exclusively with the specially developed search coils DD Ø 26 cm and DD Ø 35 cm.

The detection depths of the Z1 are much higher than those of commercially available pulse-induction or VLF-TR Metal detectors.
With the XELUMX x 1 depth finder coil and the double depth finder, search depths of approximately 1 meter can be achieved under optimal conditions for very large metal objects.

With the universal 12-meter cable search coil Ø 3 x 3 meter (frame in own construction), with a metal object Ø 3 x 3 Meter, a search depth of approx. 8 meters can be achieved even in mineral soils.

 

Supplied in carrying case with:

  • electronics part
  • Headphone
  • Padded carrying strap
  • Deep locate search coil Ø 1 x 1 meters
  • Search Coil Double D Ø 35 cm
  • Telescopic rod with forearm support
  • Charger with the adapter for all countries
  • Accumulator
  • USB - PC connection cable for firmware updates and possible later data transfer
  • Manual German - English also as a movie on DVD